ASTM A350 LF2 screwed and forged fittings are manufactured from low-temperature carbon steel specifically designed for pressure-retaining applications. These fittings are widely used where reliable mechanical performance is required at sub-zero temperatures. The LF2 grade offers excellent notch toughness and impact resistance even in cryogenic conditions. Screwed and forged fittings are produced through a hot forging process that ensures a refined grain structure. This enhances strength, durability, and resistance to fatigue. ASTM A350 LF2 fittings comply with strict chemical and mechanical requirements. They are commonly supplied in normalized, normalized and tempered, or quenched and tempered conditions. These fittings are trusted for critical piping systems worldwide.
ASTM A350 LF2 forged fittings are primarily used in oil and gas, petrochemical, and refinery industries. Their ability to withstand low temperatures makes them suitable for LNG and cryogenic services. The forged construction ensures uniformity and superior pressure-bearing capability. Screwed fittings provide ease of installation without the need for welding. This reduces installation time and cost in high-pressure piping networks. LF2 material maintains ductility even in extreme operating environments. The fittings perform reliably under fluctuating pressure and temperature conditions. This makes them ideal for demanding industrial applications.
Screwed and forged fittings manufactured to ASTM A350 LF2 are available in various pressure classes. These fittings are designed to meet ASME and MSS standards for dimensional accuracy. Common types include elbows, tees, couplings, unions, plugs, and caps. The threaded ends ensure leak-proof connections when properly installed. Forged fittings offer better mechanical strength compared to cast alternatives. LF2 fittings are tested to ensure compliance with low-temperature impact requirements. They undergo rigorous inspection and quality checks before dispatch. This guarantees consistent performance in critical service conditions.
The chemical composition of ASTM A350 LF2 is carefully controlled to achieve its low-temperature properties. Carbon, manganese, silicon, and trace elements are balanced to ensure toughness and weldability. Impact testing is a mandatory requirement for LF2 grade materials. This ensures resistance to brittle fracture at low temperatures. The forged structure further improves mechanical reliability. Screwed fittings are machined precisely for accurate threading. This ensures proper engagement and sealing in piping systems. LF2 fittings provide long-term service life with minimal maintenance.
ASTM A350 LF2 screwed and forged fittings are commonly used in high-pressure pipelines. They are suitable for handling oil, gas, steam, water, and chemical fluids. The material offers excellent resistance to stress corrosion cracking. These fittings can withstand sudden temperature changes without loss of performance. LF2 fittings maintain structural integrity under cyclic loading. Their robust design reduces the risk of leakage or failure. They are often selected for safety-critical installations. This makes them a preferred choice for engineers and project managers.
Forged fittings under ASTM A350 LF2 exhibit superior mechanical properties compared to welded or fabricated fittings. The forging process aligns the grain flow along the shape of the fitting. This improves strength and pressure resistance. Screwed fittings allow easy disassembly and maintenance. They are ideal for compact piping layouts with limited space. LF2 fittings are available in various sizes and schedules. Custom dimensions can also be manufactured on request. This flexibility makes them suitable for diverse industrial requirements.
| Specification – ASTM A350 LF2 Screwed & Forged Fittings | |
|---|---|
| Standard | ASTM A350 / ASME SA350 |
| Grade | LF2 (Low Temperature Carbon Steel) |
| Product Type | Screwed & Forged Pipe Fittings |
| Manufacturing Process | Hot Forged |
| End Connection | Screwed (Threaded), Socket Weld |
| Size Range | 1/8" NB to 4" NB |
| Pressure Class | 2000 lbs, 3000 lbs, 6000 lbs |
| Heat Treatment | Normalized, Normalized & Tempered, Quenched & Tempered |
| Operating Temperature | Suitable for Low Temperature & Cryogenic Service |
| Applicable Standards | ASME B16.11, MSS SP-79, MSS SP-83, MSS SP-95 |
| Testing Requirements | Chemical Analysis, Mechanical Test, Impact Test, NDT (if required) |
| Surface Finish | Black, Galvanized, Shot Blasted, Coated |
| Applications | Oil & Gas, LNG, Cryogenic Systems, Petrochemical, Refineries |
ASTM A350 LF2 fittings are commonly used in low-temperature pressure vessels and piping systems. They are widely accepted in offshore and onshore installations. The fittings are compatible with carbon steel pipes of similar grades. Proper heat treatment enhances their mechanical and impact properties. LF2 screwed fittings ensure strong and vibration-resistant joints. These fittings are designed to handle both static and dynamic loads. Their reliability minimizes downtime and operational risks. This results in improved system efficiency and safety.
Quality control is a critical aspect of ASTM A350 LF2 screwed and forged fittings manufacturing. Each fitting undergoes chemical analysis and mechanical testing. Impact testing at specified temperatures ensures compliance with standards. Dimensional checks are carried out to meet ASME specifications. Thread inspection ensures proper fitment and sealing capability. Non-destructive testing may be performed when required. Certification and traceability are provided with every batch. This ensures customer confidence and regulatory compliance.
ASTM A350 LF2 fittings are suitable for both low- and moderate-temperature services. Their versatility makes them widely used across industries. The material’s toughness reduces the risk of brittle failure. Screwed forged fittings offer a compact and strong solution for piping joints. They are ideal for high-pressure and low-temperature applications. LF2 fittings maintain consistent performance over long service periods. Their forged construction ensures uniform mechanical behavior. This contributes to enhanced safety and durability.
| Chemical Composition – ASTM A350 LF2 | |
|---|---|
| Element | Composition (%) |
| Carbon (C) | 0.30 max |
| Manganese (Mn) | 0.60 – 1.35 |
| Silicon (Si) | 0.15 – 0.30 |
| Phosphorus (P) | 0.035 max |
| Sulfur (S) | 0.040 max |
| Nickel (Ni) | 0.40 max |
| Chromium (Cr) | 0.30 max |
| Molybdenum (Mo) | 0.12 max |
| Copper (Cu) | 0.40 max |
| Mechanical Properties – ASTM A350 LF2 | |
|---|---|
| Tensile Strength | 485 – 620 MPa |
| Yield Strength | 250 MPa min |
| Elongation | 20% min |
| Reduction of Area | 30% min |
| Impact Test (Charpy V-Notch) | 27 Joules min at −46°C |
| Hardness | 187 HB max |
| Heat Treatment Condition | Normalized / Normalized & Tempered / Quenched & Tempered |
| Testing Standard | ASTM A370 |
| Dimension Chart – ASTM A350 LF2 Screwed & Forged Fittings (ASME B16.11) | |||||
|---|---|---|---|---|---|
| Nominal Pipe Size (NPS) | Outside Diameter (OD) (mm) | Center to End (Elbow) (mm) | Center to Center (Tee) (mm) | Thread Length (mm) | Pressure Class |
| 1/4" | 13.7 | 19 | 19 | 10 | 2000 / 3000 / 6000 |
| 3/8" | 17.1 | 22 | 22 | 11 | 2000 / 3000 / 6000 |
| 1/2" | 21.3 | 25 | 25 | 13 | 2000 / 3000 / 6000 |
| 3/4" | 26.7 | 29 | 29 | 15 | 2000 / 3000 / 6000 |
| 1" | 33.4 | 35 | 35 | 18 | 2000 / 3000 / 6000 |
| 1-1/4" | 42.2 | 44 | 44 | 20 | 2000 / 3000 / 6000 |
| 1-1/2" | 48.3 | 51 | 51 | 22 | 2000 / 3000 / 6000 |
| 2" | 60.3 | 64 | 64 | 25 | 2000 / 3000 / 6000 |
| 2-1/2" | 73.0 | 76 | 76 | 28 | 2000 / 3000 / 6000 |
| 3" | 88.9 | 89 | 89 | 30 | 2000 / 3000 / 6000 |
| 4" | 114.3 | 102 | 102 | 35 | 2000 / 3000 / 6000 |
| Equivalent Grades – ASTM A350 LF2 | |
|---|---|
| Standard | Equivalent Grade |
| ASTM / ASME | ASTM A350 LF2 / ASME SA350 LF2 |
| EN (European) | EN 10222-2 P355NL1 / P355NL2 |
| DIN | DIN 1.0566 / 1.0569 |
| BS | BS 970 3.1 / BS EN P355NL1 |
| IS (Indian Standard) | IS 2002 Grade III / IS 2062 E350 LT |
| JIS | JIS G4051 S25C (Comparable) |
| GB (China) | GB/T 1591 Q345E |
ASTM A350 LF2 Screwed & Forged Fittings are low-temperature carbon steel fittings designed for welded and threaded piping systems. They are commonly used in oil & gas, chemical, and power industries where low-temperature impact toughness and reliability are critical.
This specification includes elbows, tees, reducers, caps, couplings, and other threaded or forged fittings. Both screwed (threaded) and forged designs ensure safe, leak-proof connections in low-temperature piping systems.
ASTM A350 LF2 fittings are made from carbon steel containing carbon, manganese, phosphorus, sulfur, and silicon. This composition provides excellent toughness, weldability, and impact resistance at sub-zero temperatures.
These fittings provide high tensile and yield strength, good elongation, and exceptional impact toughness at low temperatures. They are suitable for critical applications where cold-temperature brittleness must be avoided.
Yes, forged fittings can be welded using standard carbon steel welding procedures, maintaining low-temperature toughness. Threaded fittings are used for screw connections and are typically not welded. Proper welding ensures reliable joints and structural integrity.
These fittings are available in sizes ranging from ½ inch to 48 inches, covering both small-diameter process lines and large industrial pipelines. This makes them versatile for a wide range of low-temperature piping applications.
LF2 carbon steel fittings offer moderate corrosion resistance. In highly corrosive environments, protective coatings or alternative materials may be required to prevent premature degradation and ensure longevity.
These fittings undergo dimensional inspections, hydrostatic testing, and low-temperature impact testing. These tests ensure compliance with ASTM standards and guarantee safe operation in sub-zero temperature piping systems.
Industries such as oil & gas, chemical processing, power generation, and cryogenic systems use ASTM A350 LF2 fittings due to their excellent low-temperature toughness, high reliability, and suitability for critical piping applications.
ASTM A350 LF2 fittings comply with ASTM A350/A350M standards for low-temperature carbon steel and conform to ASME B16.11 dimensional standards for screwed and forged fittings. This ensures compatibility, safety, and reliable performance in low-temperature service.
We export steel pipes and tubes to over 60 countries worldwide, serving clients across Asia, Europe, the Middle East, Africa, Oceania, and the Americas. Our strong global logistics network ensures reliable delivery, quality assurance, and compliance with international standards.
Export Destinations Include:
Afghanistan, Albania, Andorra, Angola, Austria, Australia, Bahrain, Bangladesh,
Bhutan, Brazil, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus,
Croatia, Czech Republic, Canada, Denmark, Estonia, Egypt, Finland, France,
Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran,
Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia,
Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Madagascar, Mexico,
Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal,
New Zealand, North Korea, Netherlands, Norway, Nigeria, Oman, Poland, Portugal,
Pakistan, Palestine, Philippines, Qatar, Russia, Romania, San Marino,
Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Saudi Arabia, Singapore, South Korea, South Africa, Sri Lanka, Sudan, Syria,
Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine,
United Kingdom, United Arab Emirates (UAE), Uzbekistan, Venezuela, Vietnam,
Yemen, and more.
